HICLOVER TS Model Incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.clovertech.com.cn/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model
TS100(PLC)	TS150(PLC)
TS300(PLC)	TS500(PLC)

Burn Rate (Typical )

100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour	Control Mode
PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Power
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm
		2020-09-17	400x210x300cm	450x210x300cm

UNAMID supports its dependants via the operation of several self-sustained camps located across the mission AOR. These camps contain all elements representative of small communities. These communities include hospitals and medical facilities, power generation stations, grocery shops, kitchen and dining facilities and large scale use of packaged material in plastic, cardboard and similar. The waste generated in these camps are therefore representative of average small communities without heavy industry. The main objective of this document is to provide potential bidders with necessary information to supply the large capacity containerized incinerators to UNA M I D as described in subsequent clauses.

1. Medical waste incinerator – Small

2. Medical waste incinerator – Medium

3. General waste incinerator – Small

4. General waste incinerator – Medium

5. General waste incinerator – Large

5. General waste incinerator – Large with automated feeding system

Supply of Medical and General waste incinerators

FOR THE PROVISION OF

LARGE CAPACITY CONTAINERIZED INCINERATOR AND ACCESSORIES

The proposed incinerators shall be built into standard 20ft lSO contai ners or alternatively built into similar footprint complete with ISO load handling facil ities (hooks噜 eyelets, etc). The number of conta iners/container sized modules required for each unit is at the discretion of the Contractor.

•Thermocouple

•temperature gauge

•fire rope

•burn er

•induction air fan

•digital temperature display panel

The incinerator combustion chamber(s) should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion , etc. The incinerator shell shall be made of mild steel with an adequate thickness (minimum 15 mm) and painted externally with heat resistant aluminium paint suitable to withstand 250 °C. The outside surface temperature of the incinerator casing should not exceed 50 °C above ambient temperature and shall include a safety mesh around all hot surfaces. Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.

•Heavy steel construction.

•Fixed hearth geometry and starved air gasification operationa l mode.

•Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.

•Cold face refractory lining of calciu m si l icate or superior material, minimum thickness 100mm.

•Refractory lining of all the ducts shall be done with refractory castings. Su perior quality ceramic wool shall be used at all hot duct flanges and expansion j oints.

•Multi ple electric ignition fuel bu rners designed to use automotive d iesel fuel.

•Flame of the primary burner shall be oriented towards the center of the uni t which does not impinge directly on the refractory floor or wall. The secondary burner shall be positioned in such a way that the flue gas passes through the flame.

•The unit shal l prevent leakage of the hot flue gas and any backfire.

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

2020-09-17