Medical Environmental

There are generally 4 different kinds of medical waste: infectious, hazardous, radioactive, and general.For the purposes of this review these […]

biohazard waste disposal guidelines 1. The ground should be flat when install the incinerator. There should be 100cm at least between the incinerator  and the walls on the two sides and the back, which is in convenient maintenance and repair. 2．  A), Place the incinerator main body(combustion chamber) and fixed with bolts and Asbestos tape. B), Place the wet scrubber system and fixed with bolts and Asbestos tape. C). Install chimneys and fixed with bolts, Asbestos tape and Steel Rope. D). Fix the incineration house roof. E). Fix burner, blower, wind tube, electric system, fuel system. 3. Check the electric wire: the incinerator’s electric circuit should be linked with the ground wire to guard against current leakage.  The link-up of the electric wire should be checked carefully before starting the incinerator, in case of wrong link-up or leakage. 4. Check of the fuel supply system: Except the Burner’s soft pipe which is used for the fuel flowing-in and flowing-back, all the rest pipes must use brass or steel pipe. No leakage is allowed at pipe junctions. Any leakage should be blocked in time. 5. Install steel rope with the chimney, to avoid tilt by wind.  6. Install net cover at the blower, to avoid sundries. 7. If the fuel is Natural Gas with gas burner, please contact with local administration section and install gas supplier system. 8. Crane or forklift is necessary when download/upload/install incinerator.  9. Topped work house roof after installation. 10.Get the video material: http://www.eclover.net/category/incinerator-video/     Nanjing

diesel powered incinerator means the burner type is light oil with diesel oil fuel. the incinerator made by us have 2 combustion

we supply incinerator for Kenya, with IDF SGS certification. the HS code of incinerator is 84178050. if you are looking

small scale municipal solid waste inceneration technologies including key  point is high temerature combustion. the chamber made with heavy duty refractory material,   we fix oil or

How medical waste is incinerated? The pyrolytic incinerator comprises a pyrolytic chamber and a post-combustion chamber. Medical waste is thermally decomposed in the pyrolytic chamber through  an oxygen-deficient, medium-temperature combustion process (800– 900°C), producing solid ashes and gases.   What are the treatment methods for treatment of bio medical waste? Thermal processes     Low-heat systems (operates between 93 -177oC) use steam, hot water, or electromagnetic radiation to heat and decontaminate the waste     High-heat systems employ combustion and high temperature plasma to decontaminate and destroy the waste. …     Incineration.     Autoclaving.     Microwaving.     Deep Burial.   Nanjing Clover Medical Technology Co.,Ltd. waste to energy plant suppliers medical waste incinerator types

we produce incinerator for the waste incinerator for covid19 ppe waste, small capacity is 5-10kgs per hour powered by diesel oil.   high temeprature combustion chamber

we supply brand new incinerator for animal waste incinerator for farm,pig,chicken, Agriculture, farms, pigs, cattle, sheep, chickens, ducks,etc   small

how does the incinerator works? the incinerator mainly for medical waste and animal waste treatment with oil/gas fired in the primary chamber with high

what’s the incinerator of hospital pictures and drawings? if you want to build or buy new incinerator for hospital, confirm the waste capacity per day,

we use latest incinerator technology with high temperature combustion with 2 or 3 chambers, with wet scrubber or dry scrubber system and

we supply medical two chambers incinerator 800 to 1200 degrees. the capacity from 10kgs per hour to moran than 1000kgs per hour. all incinerator pass ISO and

we supply kinds of spare parts for waste incinerator and oil or gas burners. SENSOR. BTL20/BTL26 BURNER, FLAME DETECTOR, QRB1B L=350 CAPTEUR. BTL20 / BTL26 BRULEUR, DETECTEUR DE FLAMME Motor 　 Control box Simens

TS10 PLC Waste Incinerator   Outline Dimension:1.75 x 1.3 x 1.7m Weight: Ave.1500kgs Main body(Primary combustion chamber) Material：Carbon Steel Q235B+Stainless Steel 310s+refractory firebrick material(high temperature resistance up to 1750℃) Capacity: 10-20kg/batch Combustion temperature: 800-1000℃ With chamber door, oxygen supplementation wind port, burner port, temperature control and alarm device, etc. [1 unit ] Secondary combustion chamber Material：Carbon Steel Q235B+Stainless Steel 310s+refractory firebrick material(high temperature resistance up to 1750℃) Combustion temperature:1000-1200℃ With observation port, burner port, temperature control and alarm device, etc. [1 unit ] High temperature flue gas filtration chamber Material: Outside plate: Q235B, Inside acid-resisting, alkali-resisting refractory poured material. With ash door and filtration material. [1 unit ] 1# BURNER OF 1# CHAMBER Riello brand （Italy） (High quality, combustion-resisting) Fuel: Natural gas [1 unit ] 2# BURNER OF 2# CHAMBER Riello brand （Italy） (High quality, combustion-resisting) Fuel: Natural gas [1 unit ] Chimney Material: Stainless steel，304 Length: 5m ( other length as customer request） [1 unit ] Temperature control device -Thermocouple [2 unit ] Control valve [2 pcs ]

  pictures of 500kg per hour machine   Items/Model TS500(PLC) Picture   Principle Medical Waste Incineration Treatment how many burners does the primary have Burn Rate Average

incinerator for poultry farm dead checkin 575 kg, HICLOVER YD50 incinerator or TS50     Model YD-50 Picture   Burning Rate Average 50 kgs/hour Feed Capacity Average 150

there was one set oil fired incinerator send to Kenya. average capacity 30-50kgs per hour for small hospital.   if

HICLOVER incinerator exert the advantages and discard the disadvantages of the same kind of equipment at domestic and abroad. It is

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and

Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. We are local  manufacturer and one

Medical Waste Incinerator for Coronavirus Disease( COVID-19).    * Full variety incinerator with Standard Small-Large Scale incinerator, General Municipal Solid

HICLOVER Incinerator/Parts Range Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers Single Combustion Chamber Small, Cheap,10-20kgs/Hr. Three Combustion Chambers(Optional) 3 Chambers for high risk waste

Model A1500 Picture   Brand/Product Code HICLOVER/N1134 Burning Rate Average 50 kgs/hour Feed Capacity Average 150 kgs/feeding Primary Combustion Chamber

Items/Model HICLOVER TS150(PLC) (Mobile Type) N1155 Picture  mobile incinerator Principle Waste Incineration Treatment,trash incinerator Burn Rate Average 150 kg/hour Feed Capacity Average 150kg/feeding

Items/Model TS50(PLC) Picture Principle Medical Waste Incineration,dual chamber incinerator Burn Rate 50-100 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber

Items/Model TS50(PLC) Picture Principle Medical Waste Incineration  Burn Rate 50-100 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 560L Internal

Items/Model TS500(PLC) Picture   Principle Waste Incineration Treatment Burn Rate Average 500 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber

Item Specification Model YD-20C Main Product List   Primary Combustion Chamber Secondary Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Incinerator

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. 1. Incinerator 10kg per hr 2. Incinerator 20kg per hr 3. Incinerator 50kg per hr 4. Incinerator 100kg per hr

Items/Model TS800 Picture   Principle Animal Waste Incineration Treatment Burn Rate Average 300-450 kg/hour Feed Capacity Average 1200kg/feeding Control Mode Electric Control

Item Specification Model A1500 Internal Dimensions 150 x 100 x 96cm Suit for Animal Cat – yes Dog – yes

Item Specification Model YD-20C Main Product List   Primary Combustion Chamber Secondary Combustion Chamber Mix-Combustion Chamber Smoke Filter Chamber Incinerator

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. Equipment Technical Specifications Model TS30S Picture   Feed Capacity 78 Liters for primary chamber Burning Rate

Items/Model TS75 Picture   Principle Solid Waste Incineration  Burn Rate Average 75 kg/hour Feed Capacity Average 100kg Control Mode PLC(Programmable Logic Controller

The Incinerator units shall be designed to last in operation in a tropical environment for a minimum period of 10

Waste Disposal Methods in Hospital • An 8 hour daily operating cycle of ash removal, pre-heat and burn with continuous

Model A1500(Movable platform & Auto. Door) Picture   Burning Rate Average 50 kgs/hour Feed Capacity Average 150 kgs/feeding Primary Combustion Chamber

Items/Model TS1000 Picture   Principle Waste Incineration Treatment Burn Rate Average 1000 kg/hour Feed Capacity Average 3000kg/feeding Control Mode PLC(Programmable Logic

Medical Waste Incinerator Capacity: average 50-100 kgs per hour Items/Model TS50(PLC) Picture   Principle Medical Waste Incineration  Burn Rate Average 50-100 kg/hour Feed

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. HICLOVER Incinerator/Parts Range Main Feature Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers Single Combustion Chamber Small, Cheap,10-20kgs/Hr. Three Combustion Chambers(Optional) 3

The equipment proposed shall be an incinerator specialised for Medical Wastes.  Medical waste may consist of discarded materials or equipment

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. HICLOVER Incinerator/Parts Range Main Feature Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers Single Combustion Chamber Small, Cheap,10-20kgs/Hr.

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. HICLOVER is now offering a full range of medical waste incinerators, designed to provide efficient waste

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. Items/Model TS30(PLC) Picture   Burn Rate Average 30-50 kg/hour Feed Capacity Average 60kg/feeding Control Mode PLC(Programmable Logic

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. Incinerator Model TS10 PLC, Overview   This model Construction is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. Waste feed chamber is 100Liters (0.1m3, TS10 PLC). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation. Items/Model TS10(PLC)  

Top Openning Door Waste Incinerators Items/Model TS100(PLC) TS150(PLC) TS300(PLC) TS500(PLC) Burn Rate (Average) 100 kg/hour 150 kg/hour 300 kg/hour 500

HICLOVER Top Feeding Door Waste Incinerators ▲▲▲Large Feeding Door ▲▲▲Better for Animal Waste Cremation ▲▲▲HICLOVER Brand Section ***Primary Combustion Chamber

HICLOVER Top Feeding Door Waste Incinerators ***Primary Combustion Chamber ***Secondary Combustion Chamber ***Smoke Filter Chamber ***Optional Wet Scrubber System(1 section

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.clovertech.com.cn/  Email: sales@clovertech.com.cnEmail: hicloversales@gmail.com   Nanjing Clover Medical Technology Co.,Ltd. Model YD-30  Burning Rate  average 30 kgs/hour Feed Capacity average 40 kgs Paimary Combustion Chamber 200